Results 1 to 6 of 6
  1. #1

    Workbench buildup

    I set out a couple months ago to clean up the garage and ended up building a workbench. I'm still trying to figure out how that happened.



    The top layer is made of 2 layers of 3/4" plywood for a total thickness of 1.5". If the top layer gets too beat up over the years I can replace it. Surrounding the plywood is 1.5" square steel tube to protect the edges and help give the table some beef.

    The shelves slide out on ball bearing rollers and are strong enough to hold my weight (160 lbs).

    To protect the wood from burns I placed a sheet of stainless steel sheet metal under the grinder.






  2. #2
    Registered User Glenn's Avatar
    Join Date
    Jul 2006
    Location
    Central Florida
    Posts
    343

    Re: Workbench buildup

    Nice. I love the slide out shelves.
    Glenn H. Shelton III
    My Garage Pics

  3. #3
    Contributing Member MXtras's Avatar
    Join Date
    Nov 2005
    Location
    Somewhere in Virginia
    Posts
    891

    Re: Workbench buildup

    Good idea with the stainless sheet!

    Sounds like maybe someone had a little experience with a fire at some point?

    I also like the way you hung the right side of the grinder over the edge of the bench. That is excellent thinking right there.

    We need to talk about your electrical situation, though....

    Scott
    Last edited by MXtras; 01-08-2008 at 02:40 AM.
    If it wasn't for the last minute I wouldn't get anything done

  4. #4

    Re: Workbench buildup

    Thanks all. No fire but I noticed the wood getting a little singed a while ago and I had the SS laying around. My electrical situation? You mean my lack of electricity? That will be remedied shortly. I just moved into this house less than a month ago and will be installing 120V, 240V and some shop lights.

  5. #5
    Administrator Cebby's Avatar
    Join Date
    Aug 2005
    Location
    Pittsburgh, PA
    Posts
    1,301

    Re: Workbench buildup

    Steve - is that black piece a lip on the slide out shelves?

  6. #6

    Re: Workbench buildup

    Yeah, that turned into a lip but that wasn't the original intent. When I bought the plywood I forgot to check if it was straight and ended up with a warped one. To help straighten it out I got some 1/2" square tube (because it was the cheapest) and bolted it to the plywood. In the end it was a good thing because it also helps strengthen the shelf and will help prevent sagging over the years. There's one on the front and back of each shelf.

Similar Threads

  1. brainstorming for workbench ideas
    By shephd in forum Storage and Organization
    Replies: 6
    Last Post: 09-05-2007, 12:24 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •