Results 1 to 2 of 2

Thread: Tube bender

  1. #1

    Tube bender

    I am considering building a tube bender to fabricate a chassis for a buggy design I would like to put together. Any advice on this project would be wonderful. Also, if I go forward with this project I will post detailed information of the build for everyones entertainment! Thanks, the new guy.

  2. #2

    Re: Tube bender

    I know I am replying to an old thread. But in case you are still looking for info; I mounted both my Protools 105, and JD2 benders on frames in a vertical position, set up with air/hydraulics. Saves room, and makes bending tube easy as pie!

Similar Threads

  1. Tube Bending In Arizona
    By azprerunner in forum Metal Sawing, Machining, and Forming
    Replies: 6
    Last Post: 11-04-2007, 10:57 AM
  2. JD2 Tube Bender
    By waskillywabbit in forum Metal Sawing, Machining, and Forming
    Replies: 2
    Last Post: 07-18-2006, 03:12 AM
  3. Tube Notching Jig
    By Cebby in forum Metal Sawing, Machining, and Forming
    Replies: 9
    Last Post: 07-16-2006, 04:10 AM
  4. Tube bender dies interchangeable on different setups?
    By waskillywabbit in forum Metal Sawing, Machining, and Forming
    Replies: 2
    Last Post: 04-21-2006, 12:24 AM
  5. Chop Saw Tube Nothcing 101 (with pics)
    By Cebby in forum Metal Sawing, Machining, and Forming
    Replies: 2
    Last Post: 04-02-2006, 11:47 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •